For screen reader problems with this website, please call317-284-10843 1 7 2 8 4 1 0 8 4Standard carrier rates apply to texts.
The DLA-VS4010NLG is an advanced 4K2K projector incorporating three 1.27-inch (Diag.) 4K2K D-ILA display devices. It produces extremely high-quality images for use in planetariums, museums, simulators, and medical institutions, as well as high-spec design and monitoring facilities. Its Blu-Escent™ solid state laser-phosphor light source delivers 6,000 ANSI lumens with a stunning 10,000:1 native contrast ratio. Combining superb definition and resolution with low operating cost, the DLA-VS4010NLG achieves ultra-high resolution of approximately 10 megapixels (4,096 x 2,400), which is five times that of full HD.
The projector can simultaneously display two or four screens in WUXGA (1,920 x 1,200) resolution. Multi-screen projection is facilitated by four DVI (Dual-Link) input terminals supporting an array of PC input formats. The DLA-SH7NLG also offers a low latency mode for simulation environments.
The DLA-VS4010NLG's laser-phosphor illumination system is based on JVC's proprietary Blu-Escent™ technology. The light engine uses blue laser diodes, a stationary inorganic phosphor and JVC's color management system. BLU-Escent™ enables a powerful 6,000 lumen light output and more than 20,000 projection hours. Using Laser Diodes as the light source, light output can be controlled instantly enabling a contrast ratio of ∞:1. The projector controls the laser output accordingly to the scene's brightness, which creates a picture that is as close to human perception as possible. Power is adjustable from 20-100% in 88 steps.
Its well though-out design offers operational flexibility, including the ability to stack two projectors for 3D images or installation on a ±90-degree tilt. The DLA-VS4010NLG weighs about 162 pounds, excluding lens.
Three different lenses are available, including short-focus and telescopic models
The DLA-VS4010NLG operates on normal AC 100-220V power and consumes less than 1,250 watts. Convergence is adjustable to 1/10 pixel accuracy via GUI control; three gamma tables are included. Six test patterns, including a crosshatch and color bars, enable image adjustment without external signal sources. Projection configuration data is easily stored and uploaded from a USB memory device. The Ethernet-compatible DLA-VS4010NLG can be configured via a PC Web browser, and multiple projectors are networkable for operation via a single PC.
|Image Device||3 D-ILA® devices (1.27 inches diagonal), 4096 x 2400, 6.8um Pixel Pitch, 0.25um Pixel Gap, >93% Aperture Ratio|
|Brightness||6000 ANSI Lumens|
|Display Resolution||4096 x 2400 Pixels (17:10 Aspect Ratio)|
|Contrast Ratio||Greater than 10,000:1 (Sequential)|
|Uniformity||Greater than 85%|
|DVI Input-Supported Resolutions||4096x2400, 4096x2160, 3840x2400, 3840x2160, 2048x1200, 2400x1080, 1920x1080, 1920x1200, 1600x1200, 1280x1024, 1024x768, 800x600, 640x480|
|DVI Clock||165MHz (single link), 330MHZ (dual link)|
|Latency||<10ms in 4-stripe mode|
|Color Bit Depth||8 bits maximum single link DVI, 12 bits maximum dual link DVI|
|I/O Terminals||DVI-D (dual link) x 4, Ethernet, RJ45 x 1, USB, Type B (slave) x 1, RS-232C, D-Sub 9 pin (male) x 3|
|Remote Control||Integrated Web Browser Interface, RS-232C Fully featured control protocol|
|Projection Lens (Optional)||GLMS4011SG - 1.1:1 Fixed lens, ±25% V offset, GLMS4015SZG - 1.5-1.84:1 Zoom lens,±50% V and ±25% H offset, GLMS4021SZG - 2.15-3.65:1 Zoom lens,±50% V and ±25% H offset|
|Power Requirement||AC 100V-120V, 200V-240V, 50/60Hz (single phase)|
|Power Consumption||1250 Watts Maximum, 11.5A/5.75A, AC 110V/240V|
|Noise Level||(0-26°C, 32- 52.3dB (A) at 39.4”/1m (3.3ft)|
|Operating Altitude||<6600ft (2000m) for safe operation, <4900ft (1500m) for guaranteed performance|
|Installation Orientation||Vertical ±90|
|Airflow Requirements||106cfm (3m3) per minute minimum|
|Dimensions ( W x H x D )||26.0” x 13.5” x 36.8” (660 x 342 x 934 mm)|
|Weight||162lbs/73.5kg, Without Lens|
|Supplied Accessories||Power Cord *Instruction manual is available from the JVC site|
|Warranty||One-Year Parts and Labor (per JVC Limited Warranty)|
|Blu-Escent Laser-Excited Phosphor||Yes|
|2-Step Power Control (2 customizable modes)||Yes|
|Adjustable Power 20%-100% (88 steps)||Yes|
|Auto Intensity mode capable||Yes|
|Light Source Life||Average 20,000hrs at 100% output|
|Product Weight (lbs.)||162|
|Brightness||6000 ANSI Lumens|
|Manufacturer Warranty||1 Year Parts & Labor|