For screen reader problems with this website, please call317-284-10843 1 7 2 8 4 1 0 8 4Standard carrier rates apply to texts.

Technology Interiors

Technology Interiors

317-284-1084

Parasound® NewClassic 2 Channel Power Amplifier

Model #: NewClassic 275 v.2

At a Glance

Fully discrete circuitry with high current toroid transformer. Automatic on/off by audio signal with 2 sensitivity settings. Bridging switch for stereo or mono operation. Standby, channel status and high temperature indicators.

WarningProposition 65 Warning for California Residents
Parasound® NewClassic 2 Channel Power Amplifier

Connections

Analog Audio(RCA) Output1

Other

Speaker A/B SwitchingYes

Specifications

Power On Consumption (watts)350
Power Off Consumption (watts)0.5
Bridged Power per Channel200
Watts RMS per Channel (4-ohms)150
Watts RMS per Channel (8-ohms)90

General Specs

Depth (in.)16
Height (in.)2.5
Width (in.)17.25
Channels2
Analog Audio(RCA) Input1
Color Finish NameBlack
Product Weight (lbs.)20
ColorBlack

Parasound® NewClassic 2 Channel Power Amplifier

Model #: NewClassic 275 v.2
136802
Model #: NewClassic 275 v.2
Parasound
$99,999.00

Call for Best Price

At a Glance

Fully discrete circuitry with high current toroid transformer. Automatic on/off by audio signal with 2 sensitivity settings. Bridging switch for stereo or mono operation. Standby, channel status and high temperature indicators.

Get to know this product.

90 watts x 2 into 8 O (all channels driven)

150 watts x 2 into 4 O or 2 O (all channels driven)

200 watts x 1 bridged into 8 O or 4 O

20 amps peak current per channel

2 Ohm stable operation with load selector switch

Two pairs of speaker outputs with front panel A/B buttons

Rear-mounted lockout switch disables front A/B buttons

High pass filter, switchable for 20Hz or 40Hz

Automatic on/off by DC trigger with looping output

Automatic on/off by audio signal with 2 sensitivity settings

Fully discrete circuitry with high current toroid transformer

Bridging switch for stereo or mono operation

Efficient, low heat design

DC Servo and relay protection circuits

Rear-mounted left and right gain controls

Standby, channel status and high temperature indicators

Gold-plated RCA input jacks

Heavy duty 24k gold-plated 5-way speaker terminals

115/230v selector on rear panel

Power Output - (RMS power, 20 Hz - 20 kHz) All Channels Driven

90 watts x 2, 8O

150 watts x 2, 4O

150 watts x 2, 2O (Load switch set to 2-3O)

Bridged Mono

200 watts x 1, 8O

200 watts x 1, 4O (Load switch set to 2-3O)

Current Capacity

20 amps peak per channel

Frequency Response

20 Hz - 50 kHz, +0/-3 dB, 1 watt

Dynamic Headroom

1.3 dB

Total Harmonic Distortion

0.35% at full rated output

0.025% at average listening levels

IM Distortion

0.05 %

Transient IM Distortion

Not measurable

S/N Ratio

110 dB at rated output, IHF A-weighted

103 dB at rated output, unweighted

93 dB at 2.828 V output, IHF A-weighted

84 dB at 2.828 V output, unweighted

Input Impedance

33 k O

Input Sensitivity

800 mV for full rated output (28dB)

Inter-Channel Crosstalk

80 dB @1 kHz, 72 dB @10 kHz, 65 dB @ 20kHz

Damping Factor

Over 150 at 20Hz

12V Trigger Turn On

DC 9 - 12V, 15 mA

Audio Turn On

Quieter: 1 mV

Louder: 6 mV

AC Power Requirement

110 - 120 V / 220 -240 V, 50 - 60 Hz

0.5 watts standby

25 watts Idle (no audio)

350 watts full output

Dimension

Height without feet: 1.75”

Specifications

General Specs

Depth (in.)16
Height (in.)2.5
Width (in.)17.25
Channels2
Analog Audio(RCA) Input1
Color Finish NameBlack
Product Weight (lbs.)20
ColorBlack

Connections

Analog Audio(RCA) Output:1

Other

Speaker A/B Switching:Yes

Specifications

Power On Consumption (watts):350
Power Off Consumption (watts):0.5
Bridged Power per Channel:200
Watts RMS per Channel (4-ohms):150
Watts RMS per Channel (8-ohms):90
WarningProposition 65 Warning for California Residents